Godrej Aeolus Bench TopFume Hood is designed to give you the highest protection against undesired fumes, be ergonomically convenient for the users and at the same time reduce the energy consumption that occurs in convential designed hoods.Safety of the end-users is achieved through superlative fume containment with help of our intelligently designed 3-stage Assisted Airflow System or 3AAS
Real life airflow simulation
Aeolus is designed based on outcomes of advanced COMPUTATIONAL FLUID DYNAMICS (CFD) analysis that simulated actual working conditions helping to analyze their effects on airflow patterns and subsequent fume containment.
World class airflow engineering
1.For ABP and LCV: A fully air assisted & Internal vortex control improves containment near the sash opening by increasing the velocity of fresh air. 2)Aerodynamic Sash Terminator and Handle: A gentle airlift by 6-degree in the aerofoil improves the containment considerably. 3) For LCV: Outer elephant tusk deflector at face level has ensured containment by increasing the airflow into the hood. 4) The gradual slope of the inner deflector vane assists the incoming fresh air to control the internal turbulence.
Reduced Air Turbulence
This system is based upon meticulous detailing of each individual part of the sash, facilitating effective exhaust of fumes of all densities thus reducing concentration of chemical contaminants throughout the work area particulaly near operator's breathing zone and at the work surface.
High efficient fume containment
The inner design of Aeolus facilitates efficient exhaust of Light, Medium and Dense fumes for maximum user safety. Low density fumes are exhausted via the opening at the top of the baffle over the top liner. Medium density fumes are exhausted through the openings at the mid-height of the baffle. High density fumes are swept effectively across the worktop and guided by the opening at the bottom of the baffle.
Service controls outside the fume hood
Highly reliable connectors used with international sockets.FRLS cables used throughout, protecting the electrical cables and any leakages in the current, minimizing the damage.
Note : Ducting and Blowers will be at additional cost as per site survery
How to Select a Laboratory Fumehood
Godrej Aeolus Bench Top Fume Hood
Specification
Dimensions W x H x D (cm)
Multiple Size Options
Finish Color
Multiple Color Options
Certifications
ASHRAE 110; EN 14175 ( 1-3)
Delivery Condition
Knockdown
Warranty
1 Year
Care Instruction
Care instruction
Regularly clean the exterior surface of the fume hood and the sash with an appropriate cleaner. ( Note: Be sure this cleaner is not reactive with other chemicals in the laboratory. Clean stainless steel surfaces with a stainless steel cleaner and wipe only in the direction of the grain to ensure there are no scratches. Keep the air foil area dirt free to prevent any accumulation of chemicals and other foreign material. Check all internal chain-sprockets for any deterioration on a monthly basis. In such cases where the fumehood environment is highly corrosive, check should be performed more often.
